汇编语言动态分析工具中的程序插装技术

根据8086/8088语言的结构化特点,提出了程序插装的概念及其实现方法,并基于插装研制出一种动态分析工具,从而实现了对程序分支及语句的自动测试功能.     

二次流引射对保形非对称喷管性能的影响

发动机与飞机后体结构设计合理与否直接影响发动机的部件匹配和性能。利用三维雷诺平均N-S方程和k-ωSST湍流模型对飞翼布局无人机保形非对称喷管在典型飞行状态下开展了内外流流场特性的数值分析,获得了后体尾喷管推力性能和三维流动特征随二次流压力比的变化趋势。结果表明:发动机喷管落压比条件一定的前提下,通过合理优化二次流通道、增大二次流压力比,可以有效改善后体/喷管主流流场特性;当二次流与主流的流量比在0. 2%～1. 86%内时,后体尾喷管轴向推力系数的变化幅度大约为3%,在一定程度上能够减弱发动机主流的过膨胀程度,减小发动机推力损失,无人机后体尾喷管性能得到显著提高。     

浅析炮车比

本文以坦克发射时车体的角振幅和乘员所受加速度不超过一定值为基础,推导了炮车比极限值的理论公式;并对影响炮车比极值的因素进行了分析,最后,以59式坦克为例得出炮车比不超过1.71,该结论具有普遍意义.     

关于潜艇装备劳兰C导航仪技术问题的研究

本文提出了一种改善潜艇现有天线接收性能的方法,从而解决了在潜艇上安装使用劳兰C导航仪的关键技术问题。     

横向扰动对超声速混合层被动标量混合影响分析

采用大涡模拟数值计算二维空间发展的超声速混合层,重点分析横向扰动对混合层的标量结构、标量厚度以及标量体积卷吸率的影响。采用理论模型验证了数值方法在计算标量混合特性方面的准确性。结果表明,横向扰动频率和振幅明显影响着混合层的标量增长率和卷吸率。高频扰动增大了混合层近场标量增长率和卷吸率,但是低频扰动改善了混合层远场标量增长率。大尺度涡卷吸过程对混合层标量卷吸率起决定作用。多频扰动有效地增强了超声速混合层的标量混合。     

函数变换提高灰色预测模型精度的条件

指出选择函数变换来提高模型精度主要与三个方面的因素有关：提高数据序列的光滑比、调整数据序列的级比和确保凸凹性。在调整级比方面，扩充了级比压缩变换的相关定理，并讨论了几种常用的函数变换在上述三个方面的关系。最后结合实例提出，对于变换后的数据序列若不满足这三方面的要求可以再进行函数变换以达到提高模型精度的目的。     

多波束相控阵天线角跟踪性能及测试方法

针对目前对多波束相控阵天线角跟踪性能测试研究较少的问题,首先分析了多波束相控阵天线的单脉冲和差测角方法,并对波束滑动、波束穿越及信号频率变化对角跟踪性能的影响进行了仿真分析。类比传统的雷达精度校飞试验,提出了基于飞艇的角跟踪性能测试方法,对角跟踪精度及误差范围进行测试,并利用STK软件实现了可视化。仿真分析表明,该方法可以实现对多波束相控阵天线角跟踪性能的评定并具有较高的工程应用价值。     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。